What is Porotherm Bricks? Properties, Advantages, and Applications

Porotherm clay bricks are horizontally or vertically perforated clay bricks. they are manufactured in variety of sizes (common size is 400x200x200 mm) from natural clay, coal ash, rice husk, and granite slurry. The term porotherm is used for this type of brick due to its desired thermal insulation characteristics.

The perforation of the clay brick provides an exception walling system which facilitates thermal insulation resulting in cooler interiors in hot seasons and warm interior conditions in cold seasons.
The porotherm clay bricks are easy to use, economical, environmentally friendly, and it can be used for the construction of both non-load bearing walls and load bearing walls. The porotherm bricks are low weight, durable, strong, and possess a satisfactory fire resistance. It can be used with dry mortar which eliminate the need for curing time.

Properties of Porotherm Bricks

The compressive strength is greater than 3.5MPa

High thermal and sound insulation.

Low weight: it is lighter than traditional solid concrete block by 60 percent.High fire resistance

Density range from 694 to 783 kg/m3

Large in size but light in weight results in low dead load

Water absorption is around 15

Advantages of Porotherm Bricks

1. Good Strength

The compressive strength of porotherm brick is greater than 3.5MPa. The application of high temperature during its manufacturing process and the present of teeracotta material in its composition gives the material excellent strength.

2. Thermal Insulation

Porotherm bricks have great thermal insulation which is obtained due to the perforation of the bricks.

3. High Durability

The high compressive strength, fire resistance, and resistance against carbonation makes porotherm bricks highly durable and has long life span. Water absorption is around 15% that is why the risk of dampness, cracks or shrinkage of walls are substantially low.

4. Cost-effective

Not only does the porotherm bricks saves a lot of energy but also cut construction and operation cost. The usage of this type of brick would eliminate need for using AC in summer and heaters in winter, hence save energy. It does not require sand and cement for wall construction, hence it cut construction cost. Finally, it has zero maintenance cost.

5. Environmentally Friendly

The porotherm bricks have recycled content. Due to the fact that chemical materials are not used in its composition, so it would not cause allergic issues.

6. Speed of Construction

Wall construction speed increases substantially when porotherm bricks are used. This is due to brick lightweight, ease of handling, and elimination of curing time since sand and cement is not needed for the construction of porotherm brick walls.
Additionally, it can be cut and chisel easily which makes fixture installation much easier. Finally, porotherm ensure clean and dry work site that is why it leaves no debris to be disposed.

Disadvantages of Porotherm Bricks

Porotherm clay bricks cannot be used in the construction of huge structures due to its density which is about 694 to 783 kg/m3.

It may could be exposed to salt attacks due to its water absorption which is about 15% and hence the strength of the structure would be decreased.

Porotherm bricks cannot be used in the construction of foundation and base-slab works in areas of high ground water table. This is because such bricks may not able to withstand the negative pressure of water and capillary action.

Applications of Porotherm Bricks

Load bearing and non-load bearing wall constructions.

Partition wall

Infill panels within framed structures.

Single leaf or monolithic internal and external walls.

Inner leaf of brick-faced cavity walls.

Inner and outer leaves of rendered cavity walls.

Mc Mushongo Investment cc- Windhoek.